Rental

 Glass Lifting Equipment For Rent

OKTOPUS® GL-K600

  • Crane-mounted machine, industrial construction sites for use in
  • Two separate circular vacuum, vacuum all round security and built-in 2-fold
    vacuum reserve
  • Built-in vacuum and energy monitoring
  • Visual and audible alerts to derogate from the normal state
  • Network-independent, high-capacity battery power
  • Extension arms handling a large surface area components make it possible
  • Fulfils A.S.4991-2004 requirements
gl_k600_product2
GL-R-300_1-300x225

OKTOPUS® GL-R300

With the OKTOPUS® GL-R300, you can safely lift and transport large-format glass panels, weighing up to 300 kg. Four single extension arms can be installed and removed easily to adjust the equipment to different dimensions of glass panels. With installed crane arm the load can be rotated 360° and tilted 90° with or without the extension arms. The rotating movement can be locked in 45° intervals.

OKTOPUS® GL-V

  • Suitable for wall and ceiling installation
  • 2 independent vacuum circuits reservoir
  • Each vacuum circuit with a 2-fold safety and integrated vacuum
  • Integrated vacuum meter and charge meter
  • Visual and acoustic warning facilities signal deviation of the set condition
  • Powered by a high capacity rechargeable battery
  • 3 integrated hydraulic functions (tilting of the main arm, tilting of the suction bridge – tilting range total ca. 130°, height adjustment of the suction bridge)
  • Manual turning of the suction bridge by 180°, in the 90° grid lockable
  • In combination with the optionally available forklift adapter also usable for glazing in large heights
  • Fulfils A.S.4991-2004 requirements

OKTOPUS® GL-K800

gl_v-291x300
img-1
img-2
img-3

You can safely move large-format wall and roof panels weighing up to 800 kg with the OKTOPUS® GL-K800. If the dimensions of the OKTOPUS® GL-K800 are too large for the load to be transported, it is possible to easily remove the four extension arms, including the suction cups mounted to them. The load bearing capacity of the 6 remaining suction cups is 480 kg. The load can be manually rotated 360° and tilted 90° with or without the extension arms. The rotating movement can be locked in 45° intervals and the tilting movement in 18° intervals.

ki-b400

OKTOPUS® GL-CC777300

  • Suitable for wall and ceiling installation
  • Suitable for lifting and moving of large-format glass panels in combination with a mini crane.Description:
    • Crane attachment for use on construction sites
    • Mounting both at the crane hook and directly at the crane arm possible
    • 2 independent vacuum circuits, each vacuum circuit with dual safety system and integrated reserve vacuum
    • Integrated gauge for monitoring the vacuum and power supply
    • Optical and acoustic alarm signals deviations of the set conditions
    • Batteries attached on the lower end of the crane arm supply the vacuum unit with electric power
    • Electric actuators for a precise, stepless rotating (95°), swivelling (±40°) and tilting (120°) of the load
    • Activation of the rotating, swivelling and tilting cylinder as well as all pneumatic functions by radio remote control
    • Extension arms also permit handling of large-format panels
    • Fulfils A.S.4991-2004 requirements

OKTOPUS® GL-CC777600

Suitable for lifting and moving of large-format glass panels in combination with a mini crane.

Description:

    • Crane attachment for use on construction sites
    • Mounting both at the crane hook and directly at the crane arm possible
    • 2 independent vacuum circuits, each vacuum circuit with dual safety system and integrated reserve vacuum
    • Integrated gauge for monitoring the vacuum and power supply
    • Optical and acoustic alarm signals deviations of the set conditions
    • Batteries attached on the lower end of the crane arm supply the vacuum unit with electric power
    • Electric actuators for a precise, stepless rotating (95°), swivelling (±40°) and tilting (120°) of the load
    • Activation of the rotating, swivelling and tilting cylinder as well as all pneumatic functions by radio remote control
    • Extension arms also permit handling of large-format panels
    • Fulfils A.S.4991-2004 requirements
GL-CC777600_3
IMG_5807-300x200

OKTOPUS® RoboGlaze

The OKTOPUS® RoboGlaze, is a multi-directional robotic glass installation vacuum lifter. It has a capacity of up to 600kg and can be handled with a forklift or Telehandler.

This Lifter has the unique ability to “side shift” 300mm in either direction which is highly beneficial when used on a forklift or telehandler not equipped with side shift function.

When required the RoboGlaze can be converted into a RoboPanelmaster by simply substituting the glass handling attachment with the panel handling attachment. In this configuration the Lifter can handle vertical or horizontal wall cladding up to 400kg and 14m long.

The OKTOPUS® RoboGlaze fulfils A.S.4991-2004 requirements.

ROOF AND WALL PANEL VACUUM LIFTERS

OKTOPUS® GI-B400

The OKTOPUS® GI-B400 is suitable for both horizontal and vertical wall installation, and for the installation of ceiling panels as required in industrial construction and refrigeration room construction. Nearly all commercially available sandwich panels weighing up to 400 kg can be installed using the proven round and oval suction cups from Wirth.The OKTOPUS® GI-B400 was designed as a forklift attachment. It has its own power supply which means there are no cumbersome and, at times, even dangerous power cords to deal with during installation. Its lead-acid batteries are high-powered and thus can easily be used for 8 to 10 hours. The integrated hydraulic system ensures optimum handling of the building panels during horizontal wall and ceiling installation.

GI-B-400-R-E-B24P-031-4-199x300
ki-b400

OKTOPUS® KI-B400

The OKTOPUS® KI-B400 is suitable for the vertical installation of building panels as is needed, for example, in industrial construction and refrigeration room construction. Nearly all commercially available sandwich panels weighing up to 400 kg can be installed using proven round and oval suction cups.

The OKTOPUS® KI-B400 was designed as a forklift attachment. It has its own power supply which means there are no cumbersome and, at times, even dangerous power cords to deal with during installation. Its lead-acid batteries are high-powered and thus can easily be used for 8 to 10 hours.

OKTOPUS® KS-B400

Composite panel lifting machine. Suitable for installation of roof panels and horizontal and vertical wall cladding of various profiles. Capacity up to 400 kilos. Can be handled with a crane, forklift or tele-handler depending on the application.

KS-B-400-R-M-B24-P-010-2-300x199
PT400-R-E-B24-P-030-5-300x225

OKTOPUS® PT-400

The latest innovation from the OKTOPUS range, the PT-400 vacuum lifter offers 180°tilt to rotate roofing panels from face-to-face into mounting position.
The PT-400 is the ideal lifter for roofing panel installation and is highly compatible with a range of composite roof panels.

DUALTECH CL-1

The DUALTECH CL-1 is a load suspension device for large, inherently stable wall and roof elements with at least one partial smooth surface which is impervious to air on one side. The unit is frequently used for industrial and cooling room construction.

Dual-Tech-CL1-photo-225x300
Clad-Boy-Photo-300x196

Cladboy CB3

The Cladboy CB3 is a load suspension device for large, inherently stable wall and roof elements with at least one partial smooth surface which is impervious to air on one side. The unit is frequently used for industrial and cooling room construction.

ANCILLIARY EQUIPMENT

Maeda MC305c-2

  • Lifting Capacity : 2.98t×2.5m
  • Maximum Working Radius :12.16m×0.26t
  • Dimensions (L×W×H) : 4285×1280×1695mm
  • Outrigger Safety System
  • 4 Fall/2 Fall Hook Block
  • Two Way Remote Controller
mc305c-2
HTL4014-243x300

Telehandler 4017

The Telehandler 4017 has a 4 litre capacity Deutz turbo engine, 4-wheel drive and steering, Proportional controls for mast / telescopic arm / excavation and accessories movements, Smooth approach movements thanks to inching system, Anti-tilting cabin-mounted load controller with 5 LEDs: cut-off and audible alert with automatic reduction in rearward travel speed limit to ensure safety, and Stabiliser and tilt locking when arm is raised.